I'm getting errors when I run 'make install' for ncbi-blast-2.6.0+-src. The configure runs successfully, but here are the errors I get after running 'make install':
sudo make install if test -d /home/o/RM/ncbi-blast-2.6.0+-src/c++/ReleaseMT/bin/gbench; then \ make install-gbench; \ else \ make install-toolkit; \ fi make: ingresso nella directory "/home/o/RM/ncbi-blast-2.6.0+-src/c++" /bin/rm -rf /usr/local/rmblast/include/ncbi-tools++ /usr/bin/install -c -d /usr/local/rmblast/bin /usr/local/rmblast/lib /usr/local/rmblast/include/ncbi-tools++ /usr/bin/install -c /home/o/RM/ncbi-blast-2.6.0+-src/c++/ReleaseMT/bin/* /usr/local/rmblast/bin /usr/bin/install -c -m 644 /home/o/RM/ncbi-blast-2.6.0+-src/c++/ReleaseMT/lib/*.* /usr/local/rmblast/lib if test -d /home/o/RM/ncbi-blast-2.6.0+-src/c++/ReleaseMT/lib/ncbi; then \ cp -pPR /home/o/RM/ncbi-blast-2.6.0+-src/c++/ReleaseMT/lib/ncbi /usr/local/rmblast/lib/; \ fi rm -f /usr/local/rmblast/lib/lib*-static.a cd /usr/local/rmblast/lib && \ for x in *.a; do \ /bin/ln -s "$x" "`/usr/bin/basename \"$x\" .a`-static.a"; \ done cd /home/o/RM/ncbi-blast-2.6.0+-src/c++/include && find * -name CVS -prune -o -print |\ cpio -pd /usr/local/rmblast/include/ncbi-tools++ 51193 blocchi /usr/bin/install -c -m 644 /home/o/RM/ncbi-blast-2.6.0+-src/c++/ReleaseMT/inc/* /usr/local/rmblast/include/ncbi-tools++ /usr/bin/install: directory '/home/o/RM/ncbi-blast-2.6.0+-src/c++/ReleaseMT/inc/common' omessa Makefile:40: recipe for target 'install-toolkit' failed make: *** [install-toolkit] Error 1 make: uscita dalla directory "/home/o/RM/ncbi-blast-2.6.0+-src/c++" Makefile:62: recipe for target 'install' failed
This post was moved to a different board that fits your topic of discussion a bit better. This means you’ll get better engagement on your post, and it keeps our community organized so users can more easily find information.
As you’ll notice, your topic is now here in the Project Development Help and Advice board. No action is needed on your part; you can continue the conversation as normal here.
Mark helpful posts with Accept as Solution to help other users locate important info. Don't forget to give Kudos for great content!
Hi @fripeki ,
If your post isn't getting enough attention over here you can always consider to raise the issue at the project itself. Often there is a bit more specific knowledge availible there.