Help
cancel
Showing results for 
Search instead for 
Did you mean: 
Ground Controller Lvl 1
Message 1 of 2

Please help me on my IOT smart irrigation project.

My project requirements-(arduino code)
1.Automatic function-
-There is a agricultural field.
-There will be soil moisture sensor and water pump.
-When the soil is dry,the water pump will be turned on automatically.And when sufficient amount of water is received or the soil gets wets,the pump will automatically get off.Also the user will receive an sms and email about the pump being turn on and off.

2.Manual Function.
-When the soil is dry,the user will receive an alert(sms+email) about dry soil.
-Then user will send an sms from his mobile to turn on the pump.
-Then when the soil gets moist,the user will again receive an alert about moist soil.
-Then user will send an sms to turn the motor off.
I hope you can understand what I am trying to express.

So the basic idea is that,in both the automatic and manual mode,the user can irrigate the agricultural field.

Both the automatic and manual function should be present in the same kit.

I will be using blynk android app,arduino mega 2560,sim800l GSM module, dc water pump.

Please send me the details(code + circuit diagram) regarding this project.
I need the arduino coding for this.
please someone help me in this.
1 Reply
Moderator
Message 2 of 2

Re: Please help me on my IOT smart irrigation project.

@sanjib95 Do you have a GitHub repo in which you are working on this project? Or some other resource so those who might help you can see what you've worked on so far. If so, sharing that might enable others to help you better with your project.

Mark helpful posts with Accept as Solution to help other users locate important info. Don't forget to give Kudos for great content!