Help
cancel
Showing results for 
Search instead for 
Did you mean: 
Ground Controller Lvl 1
Message 1 of 2

Launchpad CC1350 -Contiki3.0 -6LOWPAN-6lbr

Dear all,

I did a system :

1.radio node

2.slip radio

3.BeagleBone

I would disable the BLE, despite in project-conf.h(of cc26xx-web-demo) I have the following code:

#ifndef PROJECT_CONF_H_
#define PROJECT_CONF_H_
/*---------------------------------------------------------------------------*/
/* Change to match your configuration */
#define IEEE802154_CONF_PANID 0xABCD
#define RF_CORE_CONF_CHANNEL 26
#define RF_BLE_CONF_ENABLED 0//0 prima
/*---------------------------------------------------------------------------*/
/* Enable/Disable Components of this Demo */
#define CC26XX_WEB_DEMO_CONF_MQTT_CLIENT 1//1
#define CC26XX_WEB_DEMO_CONF_6LBR_CLIENT 1//1
#define CC26XX_WEB_DEMO_CONF_COAP_SERVER 1//1
#define CC26XX_WEB_DEMO_CONF_NET_UART 1//1

/*
* ADC sensor functionality. To test this, an external voltage source should be
* connected to DIO23
* Enable/Disable DIO23 ADC reading by setting CC26XX_WEB_DEMO_CONF_ADC_DEMO
*/
#define CC26XX_WEB_DEMO_CONF_ADC_DEMO 0
/*---------------------------------------------------------------------------*/
/* Enable the ROM bootloader */
#define ROM_BOOTLOADER_ENABLE 1
/*---------------------------------------------------------------------------*/
/*
* Shrink the size of the uIP buffer, routing table and ND cache.
* Set the TCP MSS
*/
#define UIP_CONF_BUFFER_SIZE 900
#define NBR_TABLE_CONF_MAX_NEIGHBORS 5
#define UIP_CONF_MAX_ROUTES 5
#define UIP_CONF_TCP_MSS 128
//ciccio
/*#undef NETSTACK_CONF_RDC
#define NETSTACK_CONF_RDC nullrdc_noframer_driver
#ifndef RF_BLE_CONF_ENABLED
#define RF_BLE_CONF_ENABLED 0 */ /**< 0 to disable BLE support */
//#endif
//forum texas Instruments
#undef NETSTACK_CONF_RDC
#define NETSTACK_CONF_RDC nullrdc_driver
//mociccio
//#define RF_BLE_CONF_ENABLED 0
/*---------------------------------------------------------------------------*/
#endif /* PROJECT_CONF_H_ */
/*---------------------------------------------------------------------------*/

How can I do?

Thanks in advance

1 Reply
Community Manager
Message 2 of 2

Re: Launchpad CC1350 -Contiki3.0 -6LOWPAN-6lbr

Hi @cecetto,

 

Your GitHub Community Forum post was moved to a different board that fits your topic of discussion a bit better. This means you’ll get better engagement on your post, and it keeps our Community organized so users can more easily find information.

 

You can now find your Topic in the Project Development Help and Advice board.

No action is needed on your part; you can continue the conversation as normal here.

 

Let me know if you have any other questions or if I can help with anything else.

 

Cheers!

Be sure to click Accept as Solution to mark helpful posts to help other users locate important info. Also, don't forget to give Kudos for great content!