Clear CTRL-X

I am new to this software and do not have a clue what  I am doing. I was a CNC machinist for 40 years and thought I would get a machine to play around with Laser printing for a hobby. I was doing ok until I plugged in my spindle motor and I had a short . I lost a stepper module. I replaced the module and now getting “CTRL-X” .I cannot get to any controls to do a soft reset . I have power to the control board., but no signal is getting to the motors .

Thanks

Hi,

GitHub is a platform that people use to write software. GitHub itself isn’t software that is used to control motors.

You might want to look if the software that you are using has a project that is hosted on GitHub and open an issue over there.

1 Like

Hi @newfreedom58,

This post was moved to a different board that fits your topic of discussion a bit better. This means you’ll get better engagement on your post, and it keeps our Community organized so users can more easily find information.

As you’ll notice, your Topic is now in the Project Development Help and Advice board. No action is needed on your part; you can continue the conversation as normal here.

Cheers!